HPE0-S61 Sample Questions & Answers
Presales sizing tools, server deployment, firmware updates, and iLO management all tie for the biggest weighting, alongside HPE's Compute portfolio and hardware building blocks, iLO, UEFI, and Intelligent Provisioning basics, management platforms, and workload needs.
Launch the full HPE0-S61 simulator →Showing 6 of 12 free samples.
- Question 1Beginner
Identify HPE Compute Components · Distinguish HPE Compute components
A customer is standardizing their network interface form factors across all new HPE ProLiant Gen11 servers. They want to avoid consuming standard PCIe expansion slots for networking while maintaining compliance with modern open hardware standards.
Which network adapter form factor fulfills this requirement?
Show answer & explanation
Correct answer: D
HPE ProLiant Gen10 Plus and Gen11 servers utilize the OCP 3.0 (Open Compute Project) form factor for integrated networking. This allows administrators to add robust networking capabilities without sacrificing standard PCIe expansion slots. FlexibleLOM was the proprietary standard used in earlier generations (Gen9/Gen10), while Mezzanine cards are specific to blade architecture like Synergy.
- Question 2IntermediateSelect 2
Identify HPE Compute Components · Describe the advantages of HPE components
When comparing HPE SmartMemory to generic third-party DIMMs, which TWO specific advantages does the HPE-authenticated memory provide within an HPE ProLiant environment? (Select TWO)
Show answer & explanation
Correct answers: A, E
HPE SmartMemory provides cryptographic signatures that authenticate the memory with the system. This allows the HPE Active Health System and iLO to monitor the DIMMs deeply, enabling features like HPE Fast Fault Tolerance which predicts and mitigates memory errors before they cause a system crash.
HPE SmartMemory is tested and tuned specifically for HPE servers. It unlocks extended performance features, allowing memory to run at higher speeds or lower latencies than industry standards might dictate for generic memory. It also integrates with HPE Active Health System for advanced error prediction (Fast Fault Tolerance). You cannot mix DDR generations, nor does it bypass physical CPU limitations.
- Question 3Intermediate
Identify HPE Compute Components · Distinguish HPE Compute components
A technician is upgrading the memory in an HPE ProLiant DL380 server. To ensure optimal memory bandwidth and performance, which best practice must the technician follow regarding DIMM population?
Show answer & explanation
Correct answer: D
To achieve optimal performance, memory must be balanced. This means populating DIMMs evenly across all available memory channels for every installed processor. Installing all memory on one processor creates severe NUMA bottlenecks. Mixing capacities within a channel or disregarding channel architecture leads to unbalanced configurations and degraded memory bandwidth.
- Question 4Advanced
Identify HPE Compute Components · Distinguish HPE Compute components
An organization is deploying several high-end GPUs into existing HPE ProLiant DL380 Gen11 servers for an AI inferencing project. During the planning phase, the integration specialist notices that the existing power supplies are rated at 800W.
What critical component constraint must be addressed to support the new GPU workload?
Show answer & explanation
Correct answer: A
High-end GPUs significantly increase the power draw and thermal output of a server. An 800W power supply is generally insufficient for enterprise GPUs alongside standard server components. The power supplies must be upgraded to higher capacities (like 1600W), and the server will likely require high-performance cooling fans to maintain safe operating temperatures. 120V actually provides less maximum wattage than 240V.
- Question 5Beginner
Identify HPE Compute Components · Distinguish HPE Compute components
Select the correct term to complete the sentence:
To preserve the contents of the Flash-Backed Write Cache (FBWC) on a Smart Array controller during a sudden power loss, the server utilizes the HPE _______________ to provide temporary power while data is written to non-volatile flash memory.
Show answer & explanation
Correct answer: C
The HPE Smart Storage Battery is a centralized backup source that provides the necessary temporary power to the storage controller's cache module. When main system power is lost, this battery allows the controller to copy the data residing in the volatile DRAM cache over to non-volatile flash storage, preventing data corruption.
- Question 6Intermediate
Explain HPE iLO and Other Built-in Server Features · Explain how iLO secures HPE compute solutions
How does the HPE Silicon Root of Trust technology prevent compromised firmware from executing during the server boot process?
Show answer & explanation
Correct answer: B
HPE Silicon Root of Trust embeds a cryptographic fingerprint directly into the silicon of the iLO ASIC. When the server powers on, the iLO hardware verifies the integrity of the iLO firmware, which then verifies the System ROM (BIOS/UEFI), creating a chain of trust. If any firmware is compromised, the server will not boot, protecting it from low-level rootkits.
Ready for the real thing?
The full HPE0-S61 simulator has every exam-style question, timed mode, and instant scoring.