C1000-196 Sample Questions & Answers
Free IBM DataPower Gateway v10.x Administrator - Professional practice questions with worked answers and explanations. See how the ExamJungle simulator prepares you — then jump into the full test.
Launch the full C1000-196 simulator →Showing 6 of 12 free samples.
- Question 1Intermediate
Troubleshooting & Monitoring · Appliance utilization
An administrator is configuring storage utilization monitoring on an IBM DataPower Gateway appliance using the built-in File System Usage Monitor utility ('fs-usage-monitor'). What are the default operational parameters and threshold triggers for this utility?
Show answer & explanation
Correct answer: A
The File System Usage Monitor utility ('fs-usage-monitor') is enabled by default on DataPower Gateway. By default, it polls the monitored file systems (RAID, System, and Temporary) every 60 minutes, generating a warning event when a file system reaches 75% capacity and a critical event when it reaches 90% capacity.
- Question 2Intermediate
Troubleshooting & Monitoring · Appliance utilization
The IBM DataPower Gateway File System Usage Monitor ('fs-usage-monitor') utility checks capacity thresholds across three distinct storage file systems: _____, System storage, and Temporary storage.
Show answer & explanation
Correct answer: D
The three file systems monitored by the DataPower File System Usage Monitor are RAID storage, System storage, and Temporary storage. It monitors usage percentages and raises warning or critical events when storage limits exceed configured thresholds.
- Question 3AdvancedSelect 2
Troubleshooting & Monitoring · Configuring logging target
An administrator needs to optimize an active log target on an IBM DataPower Gateway appliance that streams error events to a remote syslog daemon. Which TWO configuration commands can be applied within log target mode to suppress specific noisy message codes and prevent endless self-referential logging? (Select TWO)
Show answer & explanation
Correct answers: B, C
The 'feedback-detection' command suppresses log events that would result in an infinite logging loop when writing to the target generates additional log events.
The 'event-filter' command within log target mode allows the administrator to exclude specific event codes from being processed and forwarded by the log target, suppressing noisy or irrelevant messages.
- Question 4Intermediate
Network · Configuring network interfaces
Before assigning IP addresses and routing parameters to a physical Ethernet interface via the CLI command 'ethernet ', which command should an administrator execute from status monitoring mode to identify all available physical link interface names and verify their link status?
Show answer & explanation
Correct answer: A
In DataPower Gateway CLI, 'show link' is the status monitoring command that lists all available physical network interfaces, their link status, administrative state, speed, and duplex mode. The administrator uses the interface names retrieved from 'show link' to enter Ethernet interface mode via 'ethernet '.
- Question 5Beginner
Network · Configuring network interfaces
True or False: In IBM DataPower Gateway, the 'hardware-offload' command is available to toggle TCP/IP packet processing offload across Ethernet interfaces, VLAN interfaces, and link aggregation interfaces.
Show answer & explanation
Correct answer: B
The 'hardware-offload' command is documented and supported across Ethernet interface mode, VLAN interface mode, and link aggregation interface mode in DataPower Gateway. It determines whether the network interface offloads TCP/IP processing to hardware.
- Question 6Intermediate
Network · Configure high availability
An administrator is configuring high availability using Standby Control across two DataPower Gateway appliances. According to IBM official guidelines, what recommendation is specified regarding the 'standby-preempt' setting?
Show answer & explanation
Correct answer: D
IBM DataPower documentation explicitly advises: 'Do not enable preemption'. Enabling preemption can cause virtual IP flapping if an appliance undergoes transient reboots or flapping network connections, disrupting in-flight transactions unnecessarily.
Ready for the real thing?
The full C1000-196 simulator has every exam-style question, timed mode, and instant scoring.